by colin lee

Sebart Mythos 125e Build I collected my Mythos from Dumfries Model Flying and was amazed when we unpacked her; she is only 2 inches shorter than a full 2metre ship. I check all the components and everything looked in first class condition just ten minutes with the iron and the few wrinkles in the covering were away, There are a few nice touches, The canalizer is a slid in fit and can only be removed when the canopy is off, The cowl is again a slot fit then just two screws to hold in place I dry fitted everything first with no problems anywhere. First job was to fit the Elevators, Rudder and arelons all these surfaces are fitted using robart style hinges these were very straight forward to fit just make sure the pivot points are central on the joints. Next job was to fit the servos and control linkages, again nice and straight forward, I opted for a pull pull rudder system. The next stage was to decide on a power set up, Looking at the size and weight of the plane and the type of fly